Dataset Available Remotely Hosted

Oxygen concentrations in sediment around buried oil quantified in a laboratory flume using oxygen-sensitive planar optodes

Authors: Huettel, Markus
Published On: Feb 24 2016 22:01 UTC
DOI: https://doi.org/10.7266/N7X63KBH
UDI: Y1.x041.000:0004
Files

No. of Downloads: 7

File Format(s):
jpg, xlsx, txt

Project Information

Funded By:
Gulf of Mexico Research Initiative

Funding Cycle:
Florida Institute of Oceanography (FIO)

Research Group:
Penetration, Accumulation and Degradation of BP DWH Oil in Florida Sandy Beaches

Point of Contact

Markus Huettel
Florida State University / Department of Earth, Ocean, and Atmospheric Science
mhuettel@fsu.edu

Theme keywords

Flume experiment, Oxygen concentration

ISO 19115-2 Metadata
  View Metadata
Abstract:

Oxygen concentration data from a flume experiment conducted on 26 November 2012. Quantitative interpretation of planar oxygen optode images was done using VisiSens AnalytiCal 1 software. The color coding reflects different oxygen concentrations. Blue colors are low oxygen, red and yellow high oxygen (black=no oxygen, white=100% airsaturation). Oxygen concentration data were calculated by VisiSens AnalytiCal 1 software from the calibrated planar optodes. The folders contain VisiSens oxygen sensing camera images positioned at 5 cm distances along the sidewall of the laboratory flume incubating sediment with tar balls, on 26-November 2012, at times: 8:33 when flow in the flume was initiated, 10:45 when flow continued, 15:11 when flow continued to oxygenate the sediment, 15:46 when flow was stopped in order to initiate oxygen depletion, 18:00 after deoxygenation of the sediment. Data include the calibrated oxygen pictures and associated folders with tables containing the calibrated values from the color coded oxygen pictures. The tables have 928 columns and 742 rows with each cell corresponding to one pixel on the associated image. An Excel "read me" file is provided that explains how the text file associated with each of the oxygen distribution pictures should be read. This Excel file can be used as a template for importing the txt files with the oxygen data. This dataset was submitted as RFP I Deep-C dataset R1.x138.078:0030.

Suggested Citation:

Huettel, Markus. 2016. Oxygen concentrations in sediment around buried oil quantified in a laboratory flume using oxygen-sensitive planar optodes. Distributed by: GRIIDC, Harte Research Institute, Texas A&M University–Corpus Christi. doi:10.7266/N7X63KBH

Purpose:

The degradation of buried oil in sediments is a function of oxygen concentration. This experiment demonstrates the oxygen dynamics around buried oil and shows that oxygen is consumed by the microbes degrading the oil.

Data Parameters and Units:

The uploaded tables containing the calibrated pixel values for each image use the RGB color scale. The maximum ratio of no oxygen to full oxygen was 2.26. Oyxgen concentration (umol/L)

Methods:

Quantitative interpretation of the planar oxygen optode images was accomplished using VisiSens AnalytiCal 1 software. This software is not required for the use of the data posted here as we uploaded the calibrated oxygen values for each pixel shown in the oxygen distribution pictures.

Instruments:

The VisiSens camera used to capture the pictures of the planar optodes is manufactured and sold by Presens/Germany