Abstract:

This dataset contains oxygen profile measurements from Pensacola Beach, 2010-2014. Three oxygen profiles were measured with microsensors in order to assess the change in oxygen concentration in the oil contaminated beach during hot, warm, and cold periods of the year. Immediately after the excavation of one trench segment in the oil contaminated beach, O2 optode sensors (Presens fiberoptodes encased in hypodermic syringe needles with fiber tip protectors) were pushed approximately 10 cm horizontally into the sand at 5 cm depth intervals for the determination of O2 in the pore space. Profiles were measured from the surface to 50 cm depth. Despite the protection, sensors could typically not measure more than one profile and then had to be replaced. This dataset supports the publication: Huettel, M., Overholt, W. A., Kostka, J. E., Hagan, C., Kaba, J., Wells, W. B., & Dudley, S. (2018). Degradation of Deepwater Horizon oil buried in a Florida beach influenced by tidal pumping. Marine Pollution Bulletin, 126, 488–500. doi:10.1016/j.marpolbul.2017.10.061

Suggested Citation:

Markus Huettel. 2018. Oxygen profiles measured in Pensacola Beach dry sand sediments between 2010 and 2014. Distributed by: GRIIDC, Harte Research Institute, Texas A&M University–Corpus Christi. doi:10.7266/N7XW4HBZ

Publications:

Huettel, M., Overholt, W. A., Kostka, J. E., Hagan, C., Kaba, J., Wells, W. B., & Dudley, S. (2018). Degradation of Deepwater Horizon oil buried in a Florida beach influenced by tidal pumping. Marine Pollution Bulletin, 126, 488–500. doi:10.1016/j.marpolbul.2017.10.061

Purpose:

Oxygen profiles were measured in the oil-contaminated beach in order to assess the influence of buried oil on oxygen distribution in the sand and to determine whether aerobic oil degradation can take place in the beach.

Data Parameters and Units:

Date (DD-MMM-YY), sediment depth (cm), Oxygen concentration (μmol l^-1), AV=Average, SD=Standard deviation

Methods:

The upper 50 cm of the beach were sampled during cold, warm and hot temperatures

Instruments:

Microx TX3, Presens oxygen optodes with a fiber protector were used for the measurements

Error Analysis:

The accuracy of the oxygen measurements is 1% of the reading, the precision is 0.05% of the reading.

Individual Files: