Abstract:

The dataset contains the concentrations of low molecular weight organic species observed to partition into the water under varying temperature and pressure conditions, experimentally simulated on the customized oil-water partitioning device.

Suggested Citation:

Jaggi, Aprami. 2017. Experimental simulation of partitioning behavior of low molecular weight organic species between oil and water throughout the water column. Distributed by: GRIIDC, Harte Research Institute, Texas A&M University–Corpus Christi. doi:10.7266/N7HX19QW

Publications:

Jaggi, A., Snowdon, R. W., Stopford, A., Radović, J. R., Oldenburg, T. B. P., & Larter, S. R. (2017). Experimental simulation of crude oil-water partitioning behavior of BTEX compounds during a deep submarine oil spill. Organic Geochemistry, 108, 1–8. doi:10.1016/j.orggeochem.2017.03.006

Oldenburg, T. B. P., Jaeger, P., Gros, J., Socolofsky, S. A., Pesch, S., Radović, J. R., & Jaggi, A. (2019). Physical and Chemical Properties of Oil and Gas Under Reservoir and Deep-Sea Conditions. Deep Oil Spills, 25–42. doi:10.1007/978-3-030-11605-7_3

Jaggi, A., Snowdon, R. W., Radović, J. R., Stopford, A., Oldenburg, T. B. P., & Larter, S. R. (2019). Partitioning of Organics Between Oil and Water Phases with and Without the Application of Dispersants. Deep Oil Spills, 125–138. doi:10.1007/978-3-030-11605-7_8

Purpose:

To understand the partitioning trends of organic species from oil to water along the water column during an oil spill.

Data Parameters and Units:

The following is a list of data parameters organize by the individual tabs in the spreadsheet. Methane Saturation Data (Methane Saturation Measurements at different pressure conditions): Charging Pressure (MPa), Amount of Methane per 1mL of Oil (mL), Methane Saturation (mol/mL); Partitioning Ratio in Live Oil (BTEX Partitioning Ratios with experiments done with Live Oil): System Conditions - Methane Charging Pressure (MPa), Operating Pressure (MPa), Temperature (°C); Partition Ratios (Benzene, Toluene, Ethylbenzene, m- and p -Xylene, o- Xylene) - Mean Partition Ratios (N=3), Standard Deviation from mean (N=3); Concentrations in Live Oil: System Conditions - Methane Charging Pressure (MPa), Operating Pressure (MPa), Temperature (°C); Partition Ratios (Benzene, Toluene, Ethylbenzene, m- and p -Xylene, o- Xylene) - Average Concentration in water (ppm), Standard Deviation from mean (N=3), Average Concentration in oil (ppm), Standard Deviation from mean (N=3); Partitioning Ratio in Dead Oil (BTEX Partitioning Ratios with experiments done with Dead Oil): System Conditions - Methane Charging Pressure (MPa), Operating Pressure (MPa), Temperature (°C); Partition Ratios (Benzene, Toluene, Ethylbenzene, m- and p -Xylene, o- Xylene) - Mean Partition Ratios (N=3), Standard Deviation from mean (N=3); Concentrations in Dead Oil: System Conditions - Methane Charging Pressure (MPa), Temperature (°C); Partition Ratios (Benzene, Toluene, Ethylbenzene, m- and p -Xylene, o- Xylene) - Average Concentration in water (ppm), Standard Deviation from mean (N=3), Average Concentration in oil (ppm), Standard Deviation from mean (N=3);

Individual Files: